4 oz Tungsten stick on derby weights Faster than all others TxW PackWinner Kit

Description

4 oz Tungsten stick on derby weights Faster than all others TxW PackWinner Kit
Untitled Document
The Fastest Tungsten in the World is TxW Tungsten
Almost ALL the top 10 Professional Racers run TxW Tungsten
( Based on speed records
on a national track)
If you want a fast car,
you must put the biggest engine available behind the back axle.
That means pure 99.95% tungsten from TxChemist
or TxW Tungsten Alloy from TxChemist.
Bigger Engine = better center of gravity = higher speed
Specifications:
Plates 1,2,3,4,5 are 0.7 oz. (40% more than 0.5 oz)
Dimensions: 2.4mm*12.7mm*43.5mm
In inches: 0.095"x0.5"x1.718"
Fine tune plates 6 & 7 are 0.25 oz
(2.4mm*10mm*20mm)
Super Tape is child safe and enough to mount all these bottom weights
You are Buying:
5 (five)  TxW tungsten alloy plates
2(two) TxW tungsten alloy small plates
Super Tape, 0.5 inches   wide (enough for all these bottom weights)
Features:
Each plate is designed to cover the full width of the car to optimize your center of gravity.
This means TxW plates will cover the wood better than ordinary plates and will make your car faster.
The tape is industrial strength, but fine for your child to do their own weight assembly
If you are limited on time, money, or tools, or just want the fastest car, this is what you need
Super Tape
The tape is safe for skin, has no harmful odors, safe for eyes, even if you eat it you will not be hurt. (from MSDS of tape manufacturer)
This tape is industrial strength and used in manufacturing buses, RV's, and cars as a replacement of riveting and spot welding.
It can hold metal to clean wood unbelievably strong, but can be held and worked with by your youngster without sticking to skin or causing any problems.
Once you pry an object off, your fingers can peel the tape off cleanly leaving no residue.
Once you try this tape you will never want to use screws or epoxy or messy glues again.
How to place your weights (no tools edition)
The 0.25 oz small weights would normally be placed last, with the larger plates 1-5 placed closest to the back of the car.
The Pack Winner kit has 5 identical TxW Alloy plates + 2 small TxW Alloy plates for a total of 7 plates
The District Winner has plate #1 super heavy 99.95% tungsten and the other 4 large plates are TxW Alloy +2 small plates
The Council Winner has both plates #1 & #2 99.95% tungsten and then 3 TxW Alloy plates + 2 small plates
A test car was set up to run with 5 different weight systems
available on the internet.
The Fastest Tungsten is the "pure" (99.95%) TxW plates. Available in both the Coucil Winner Kit and the Distric Winner Kit
Very close in speed is the low cost TxW Alloy that we are selling here in the Pack Winner Kit.
Pinecar screw on is next
Then  ABC screw on
All the Zinc alloy stick on parts are very slow- save your money
Tungsten cylinders are also not shown as NO Pro racer would slow his car down with a design that could use cylinders
Now that these lower cost plates are available, why would you even bother with slower cylinders, zinc or ordinary small plates?
This TxW Alloy Kit is priced way below all other tungsten plate suppliers.
How can TxW bring  High quality tungsten alloy plates to the market at such low prices?
Years of Pinewood racing and weight design coupled with a sintering process modified for TxChemist products has allowed for breakthrough low pricing on these parts.
It may take a few years, but at sometime in the future, ALL plates will be modified to copy the TxW designs.
Here we have laid out 3 different tests on our test car.
The top car shows 5 TxW Alloy plates weighing 3.5 oz.
The double arrow blue shows the 5 plates and the center of gravity for just the plates in the blue line in the middle of the blue arrow.
It also shows 4, 99.95% pure tungsten plates weighing 3.5 oz.
Those are shown by the black double arrow covering 4 plates  with the center of gravity of those plates the black line in the middle.
On the bottom car we see 7 plates of Pinecar incremental weights
™
( plus a little plate to hit 3.519 oz.).
The center of gravity of the 7 plates in the green line at the middle of the green double arrow.
It is easy to see that the TxW Alloy plates center of gravity is about 1/4" farther from the back of the car than the 99.95% plates.
We can also see that the Pinecar weights will be about 3/8" farther away than the TxW Alloy plates center of gravity.
That is why no matter what skills you have building these cars, you can get the weight correct and make your car faster than ANY other weights on the market.
And, you do not have to worry about your boy or girl attaching these weights with our child safe tape.
Photo of test car on curved area of track with one back wheel removed so you can see how plates will NOT drag on track if done correctly.
Moving the back axle location can increase both your speed and stability.
If rules or tools will not allow that, then be sure and sand or cut a little angle of wood off the back of the car so that first plate will be angled up away from the track, or it might drag.
All the other plates will be fine, especially if you use the enclosed TxW Super Tape.
Be sure and drill or place the axle close to the bottom of the car to keep the weights up high.
If you can not get axles in except up higher, sand the bottom off to make room for the weights.
Photo of a 200 gram test weight held up with just 2 small strips of super tape.
We let the weight sit on the tape for 1 day.
We then flipped the block on the side and clamped it to see how long the weight will hold without slipping or pulling off.
It has not moved in months and is not likely to ever move unless we pry it off.
This tape will hold your weights even if the stop section of your track is a little rough.
Bring a screwdriver if you need to remove weight as your fingers will not likely be able to remove anything.
The tape is safe for skin, has no harmful odors, safe for eyes, even if you eat it you will not be hurt. (from MSDS of tape manufacturer)
This tape is industrial strength and used in manufacturing buses, RV's, and cars as a replacement of riveting and spot welding.
It can hold metal to clean wood unbelievably strong, but can be held and worked with by your boy or girl without sticking to skin or causing any problems.
Once you pry an object off, your fingers can peel the tape off cleanly leaving no residue.
Once you try this tape you will never want to use screws or epoxy again.
Fine tune with Nickels 5 gr., pennies 2.5 gr., paperclips 0.5 gr.
Photo of a simple fast way to get super accurate fine tuning to bring your car weight up to exactly 5 oz
Penny weighs 2.5 grams
Small paper clip is 0.5 grams (compare to 1/16 oz plate at 1.77 grams)
tape is 0.2 grams
Not shown, but nickels weigh 5 grams and are mostly copper.
So using the provided tape and these tips, you can tune your car 3 times finer than screw on plates.
If your car is overweight at check in, do not panic, you can remove a penny or two easily ( bring a screwdriver) and put some back on if you need to.
5, TxW Tungsten Alloy plates (0.7 oz. ea.)+2,small plates(0.25 ea.), for 4 oz. of concentrated speed.
Buy with confidence from a trusted seller - TxChemist
Payment
PayPal is the preferred payment method.
Shipping
We ship every day Monday - Friday.
Returns
We hope you will love your purchase, however if you need to return it, we have a 30 day return policy.
Powerful eBay listing templates by 3Dsellers
View more great items