Portable 3-13mm End mill grinder grinding machine sharpener with 5 collets bi

Description

Feature:
1. Low maintenance,good grinding result
2. Easy to operate,unskilled man can use it to sharpen quickly
3. Diamond grinding wheel
4. Grinding fast and high accuracy
5. Motor is electronic and powerful,frequency stably,extra motor life
6. Can quickly sharpen standard drills into high-performance,self-centering split point drills
7. Support 2 blades,3 blades,4 blades and 6 blades end mills
Operation:
1. First you need to check the amount of your blade, such as the 2 blade, 3 blade etc., and then select the corresponding lock folders, such as the two blade, 4 blade shape with four sides; 3 blade, 6 blade with 6-gon, and must not be wrong. select the appropriate collet, at a 45 degree angle snap lock clip, a little tight.
2. Depending on the tool size adjustment of the knife, put the knife into the lock of a good knife to knife and then check the effect of the knife: 2 blade, 4 blade, 6 blade has a flat shape of the blade must side with the lock holder, 3 As long as there is a flat blade-shaped blade on the line, otherwise they will be corrected.
3. After all the preparation work done, now grinding tool can be just the first of each face grinding tool is adjusted according to the size of the end face grinding tool holder, and then grinding precautions:.. A.2 edge of the tool by locking clip on the 2,4 surface grinding, face grinding 3 blade cutter 1324 by locking clip on the 135 surface grinding, four blade cutter by locking clip on the 6 blade cutter by locking clip on 142,536 surface grinding.
4. Adjustable escape clearance angle grinding center: 2 blade cutter 13 on the face unlock clip, a deep (first put screwed to the bottom), 3 shallow (Loosen 2-3 cells), to rotate;3 blade cutter face unlock clip 246, 24 deep, 6 shallow, you want to rotate;4 blade cutter face unlock clip on 1324 13 24 shallow depth, does not rotate;6 blade cutter face unlock clip on 361 425 36 shallow depth of 1425, does not rotate.
5. The final steps of the second clearance angle grinding .2 edge milling cutter has a special seat, 24-locking clip on the grinding surface; 3,4,6 blade cutter grinding in the back seat grinding, edge grinding lock clip 3 246 plane, 1324 4 blade grinding surface, 6 blade without grinding.
Parameter:
1. End mill diameter: φ3-φ13mm
2. Power supply:220V(we suggest you can prepare a 110 to 220 voltage converter if your standard power is 110V)
3. Power:180W
4. Speed:5300rpm
5. Apex angle:0°~5°
6. Diamond grinding wheel:CBN/SDC
7. Size:350*230*270mm
8. Weight:10KG